Tone2 Electra2 V2.1

tone2electra2

Russian version

Tone 2 Electra 2 – мощная рабочая станция

Многослойность

Tone 2 Electra 2 поддерживает многослойность, 4 слоя для каждого патча. Каждый слой независим, содержит полнофункциональный мультитембральный синтезатор из 54 осцилляторов, который включает в себя двойные многорежимные фильтры, имеет гибкую систему модуляции, секцию эффектов и собственный арпеджиатор. 14 различных типов синтеза дают безграничные возможности для саунд-дизайна. Вы можете редактировать каждый слой отдельно или одновременно. Каждый уровень может быть сохранен с помощью команды Save и загружен с помощью команды Load. Это позволяет захватывать и перемещать отдельные слои между патчами. Комбинируйте различные слои, смешивайте различные типы синтеза, используйте разделение клавиатуры на зоны и режимы игры Poly, Mono, Legato и Glide.

Использование сэмплов

Tone 2 Electra 2 позволяет легко манипулировать Вашими сэмплами. При загрузке сэмпл автоматически настраивается на нужные ноты. При игре движок Electra 2 обеспечивает максимально возможное качество сэмпла. Поддерживаются различные режимы воспроизведения сэмплов: single, loop, а также режим loop с ручной установкой маркеров начала и конца воспроизведения. Удобная функция Autoloop позволяет играть сэмплы без щелчков. Для обработки имеются 12 встроенных эффектов. Специальное меню Quick-import-sample и Quick-Vocoder с пошаговым гидом для определения, какой семпл был загружен – инструментальный или голосовой – сделают всю работу за Вас. Что особенно приятно – все патчи можно сохранить в fxp файл, даже семплы. Также поддерживается ресинтез – достаточно просто загрузить Wav форму волны и Electra 2 превратит сэмпл в инструмент!

Осцилляторы и синтез

Electra 2 – швейцарский ножь типов синтеза! Универсальный синтез-движок позволяет заменить целую студию из аппаратных синтезаторов: от традиционных методов синтеза – виртуал-аналогового (Virtual-Analog), таблично-волнового (wavetable), субтрактивного (subtractive), синтеза фазовых искажений (Phase Distortion) и синтеза частотной модуляции (FM synthesis) – до синтеза физического моделирования (Physical Modeling), Ультра-пилы (Ultra-Saw), вокодинга (Vocoder), синхронизации (Sync), кольцевой модуляции (Ringmod), PWM-синтеза, шума (Noise), Wave-Shaping и эксклюзивного синтеза, разработанного Tone2 – фрактального синтеза (Fractal synthesis). Каждый тип синтеза был разработан с внимательным отношением к качеству звука, музыкальному потенциалу и низкому использованию ЦП.

Electra2 – the only synth you need to create a hit!

Many people say that Electra2 is the most powerful synthesizer on the market. These are bold words, but let us explain why they think it’s true…
Electra2 breathes new life into the term “synthesizer workstation”. With its powerful and sonically versatile approach to audio production, it provides you with truly outstanding new sounds. Electra2 is ready for any type of music you play!

The instrument is equipped with a high-end quality sound engine, multilayer support and a wide range of music production features, but it’s designed to put you in control. Its friendly hands-on interface allows first-timers to easily create sounds and experts to delve into sound design as deeply as they want to. And with Tone2’s high quality sound technology at its core, you’re not only working with a greater palette for creating original sounds, but also the best sound quality possible, with a lower CPU usage than any other type of workstation or synthesizer.

Electra2 comes with an astounding sound collection of over 1200 production-ready sounds by professional sound designers. A comfortable patch browser is provided to give you an instant overview of all the available categories and sounds, together with an on-screen keyboard to audition them from within the patch browser. Picking the sound you want is as easy as it can be.
In addition to its huge sound library, Electra2 is equipped with many user-friendly control options, in case you want to tweak sounds or craft your very own. Each of its 4 layers consists of a powerful multitimbral synthesizer with no fewer than 14 different synthesis methods.
Mix your own synth sequences with effects, import your own samples with a mouse click, use multiple arpeggiators to produce that massive bass line, create orchestral stacks, program groovy drumloops or play vocoder sounds with samples of your own voice. The sky is the limit…literally.

April 2015 Electra2.1 has been released

New Ultrasaw oscillators (PW controls detuning):

– 4 new oscs ‘Hypersaw Vir 3x-9x’ which can sound like the Hypersaw of the Virus
– New osc ‘Supersaw JP’ which has been inspired by the famous JP 8000
– New osc ‘Supersaw clean’ (same as above, but without disharmonic aliasing)
– New osc ‘Supernoise’ with a lush and creamy sound
– New osc ‘Hypersquare 9x’ with 9 detuned squarewaves
– New osc ‘Hypernoise 9x’ with a lush and creamy sound

New effects:

– Vocoder Pro is a high-end vocoder with 20 bands. The design is inspired by the legendary EMS 3000.
– Vocoder SVC has been inspired by the famous SVC 350.

New features:

– The effect parameters of all 4 insert effects can be modulated with the matrix. This can be used to create very unique sounds. Please note that not all possible routings make sense.
– Additional matrix target ‘FX Mix’ controls the dry/wet level of the insert effect
– Additional matrix targets ‘FX Par1-4’ control the effect parameters
– The new sound mode ‘scientific’ turns Electra2 into a precise signal generator
– The new sound mode ‘LowCut 140Hz’ cleans up the mix by removing low frequencies from Pads, Keys and Leads
– The new sound mode ‘HighCut analog’ simulates the muffled sound of analog synths and cleans up the mix by removing high frequencies from bass sounds.
– Additional patches which use the Supersaw OSCs: Electra 2.1 now ships with 1240 sounds
– 236 additional waveforms

Enhanced sound:

– The Vocoder effect has been replaced by an enhanced one
– Smart oversampling of the existing Ultrasaw osciallators
– More linear frequency response
– Replaced ‘Reverb Hall’ and ‘Reverb Room’ with better sounding algorithms
– High frequencies of ‘Delay’ and ‘PingPong’ effect

Enhanced GUI & interface:

– Mousewheel support for patch browser
– Better performance when patch browser is open
– Midi CC assignments are shown on top of the knobs
– Midi learn is more intuitive to use (right click on a knob)
– Menus are not longer closed automatically after 10 seconds
– Display of the new Ultrasaw oscs shows spread
– Switching synthesis mode does auto-set PW to a useful value

Further enhancements:

– Reduced RAM use by 30%. This allows to load 4 additional instances in 32 bit mode.
– Faster loading of patches.
– Reduced CPU use on patch loading.

Bug fixes:

– Fixed a problem with the LFO sync in song mode which could appear in some hosts
– Fixed a rarely appearing crash after loading a patch and then selecting ‘init’->’reset all’
– Fixed a problem with saving the midi learn configuration when several instances were opened and closed at the same time
– Fixed a possible GUI glitch after loading a patch
– Fixed a possible crash which could happen with some very old hosts
– Fixed a problem that could happen if tone was routed in the matrix
– Background grid of step lfo was not displayed correctly
– Fixed a bug in ‘Loudness’ where high frequencies were boosted in a slightly incorrect way
– Dialog box was opened twice if a double click was used to load a wav to osc

Changes:

– Renamed ‘Loudness’ to ‘Dynamic loud’
– Renamed ‘Bass boost’ to ‘Dynamic bass’
– Renamed ‘Analog’ to ‘Bass boost’
– Renamed ‘Psychoacoust.’ to ‘Loudness’

How to Install

———windows users——-—
1. go to C:\Windows\System32\drivers\etc\hosts
2. Copy the host file to desktop
3. open the host file with notepad ++ or any other program
4. add this lines 127.0.0.1 tone2.com 127.0.0.1 www.tone2.com 127.0.0.1 212.227.140.66
5. save and put back the host file
6. install the Vsti
7. place the key in the right dir and looked the file . “if you don’t know how to do it watch on youtube how to looked the files”
8. Done !!!!!!
———Mac Users———
1. open terminal type sudo nano /etc/hosts
2. add this line 127.0.0.1 tone2.com 127.0.0.1 www.tone2.com 127.0.0.1 212.227.140.66
3. press Ctrl +x to save it
4. install the the Vsti
5. open the terminal again and type sudo chmod -R 777 and drop the key into the terminal for example : “sudo chmod -R 777 Electra2.t2k”
6. put the key in “/Library/Audio/Plug-Ins ”
7. Done!!!!!!!

  Download Electra2 Win  Download Electra2 MAC

Tags: synth, tone2